- +91-7972517591
- solution@plutotools.com
08:30-16:00 Monday-Thusday 08:30-15:30 Friday excludeing public holidays
08:30-16:00 Monday-Thusday 08:30-15:30 Friday excludeing public holidays
14mm diameter 4xD U Drill uses SPMG 050204 Inserts.
20mm shank, 59mm max drilling depth.
Thru' coolant from the rear only (no side coolant hole).
| Diameter (D) | Max Depth (L1) | Body Length (L2) | Shank Length (L3) |
| 14 | 59 | 74 | 44 |
| Overall Length (L) | Shank Diameter (D1) | Hole Thread (G) | Inserts Used |
| 118 | 20 | M10x1.5 | SPMG 050204 |
General cutting parameters when using our SPMG 050204 UM25 Inserts
| Material | Hardness HB | Cutting Speed VC: m/min | Feed f mm/rev |
| Non alloyed steel 0-0.45% C | 150-250 | 160-250 | 0.05-0.12 |
| Low alloyed steel | 250-300 | 150-220 | 0.06-0.12 |
| High alloyed steel | 200 | 100-220 | 0.06-0.10 |
| Corrosion resistant steel | 200 | 100-200 | 0.06-0.08 |
| Stainless - Ferritic | 150-270 | 100-230 | 0.05-0.12 |
| Stainless - Austenitic | 150-250 | 70-150 | 0.05-0.10 |
| Stainless - Duplex | 230-260 | 60-130 | 0.05-0.08 |
| Stainless - Martensitic | 330 | 60-230 | 0.05-0.10 |